Adalia X3M Extenda™

The Adalia X3M Extenda™ arm shoulder consists of three components of high-strength extruded aluminum that work in conjunction to provide lateral and vertical stability and are virtually unbreakable. It features dual inclination modes: a default setting of 5 to 45 degrees, and an optional 40 to 80 degree setting after a simple adjustment.

A hexagonal eccentric adjustment at the base of each arm shoulder allows effortless arm finetuning during assembly.

A solid aluminum extension block is connected to one of the arm shoulders. This technique offsets the arm shoulder, lowering one arm just underneath another, so they can cross without conflicting.

The upper arm is attached to the front bar using a regular Adalia X3M Extenda™ fixing bracket. The offset (lower) arm uses an extended fixing bracket reinforced with aluminum tubing and a special shock-absorbing material. Having the extension on one side prevents the arms from hitting each other.

Adalia X3M Extenda™ arm employs extruded aluminum profiles, strong die-cast and thermally-treated aluminum elbows with PVC protected double aircraft cables. The heavy-duty springs inside the arms apply tremendous force to hold the fabric taut when the awning is extended.

A newly designed front bar has a modern slim look with specially engineered internal reinforcement, and gives continuity to the fabric top while still adding strength to the overall system.

A strong, galvanized and powder coated 40mm square bar with 2mm walls, after 10' projection, is upgraded to an extruded aluminum profile with 5mm architectural reinforcements ribs that prevent it from twisting.

Rolltec® uses a structural galvanized steel roller tube with spring memory to re-bound to its original shape.

A variety of brackets for any installation. Wall (regular and 3-hole), ceiling, roof brackets and 4 sizes of rafter brackets (used in combination with ceiling brackets).

A speedy bevel gear with a 5:1 ratio for quick and easy use. A special feature of this gear is a stopper that prevents the awning from rolling up in the wrong direction.

Made of solid extruded aluminum, the optional hood protects the awning from dirt, debris and the elements. A weather strip at the back eliminates the need for caulking. Unlike other metal hoods, this one will not make a vibrating noise in the wind.

Maximize your retractable awning enjoyment with a remote controlled motor from Somfy. Preinstalled at the factory, it only needs to be plugged into the regular outlet. Also available with manual override, which lets you retract your awning manually if power loss occurs.

Our Adalia family awnings are available in two different colours of powder coating finishes. White and Ivory. Other custom colours are available upon request.